Dashboard problems

Top problems

Radio and dash glitching and indicator muting

Chevrolet Cruze 2011 Turbo 6spd manual 90000 miles
When using the brake or indicator the radio will start glitching aswell as the lights and dash. It’s so annoying I’ve read it could be the negative cable but has anyone else experienced this and fixed it ??
Emily from Australia 6 years ago  
EM
2 reports 
ARTisticJcH from Australia 6 years ago
I am having the same issue but also random lights on the dash flashing on and off and some power loss/pull back on the engine. My mechanics having some issues pin pointing the cause. Had a scan done last year and picked up a misfire in one of the cylinders so spark plugs were changed and seemed fine but has started again and the latest scan detected 3 seperate issues. Im suspect its a computer fault or something. Curious to know of any others that may have found a resolution. My mechanic thinks its the gauge cluster but before i allow the repair i want to make sure as its costly. If its just a negative cable that is more an easy and cheaper repair. I have read online of others having issues with the negative battery cable.
Have noticed it does trigger alot when using the indicator or breaking and the radio(have had it turned off for 2 days and hasnt had any issues).
Emily from Australia 6 years ago
Hey ! Yes it’s the negative battery cable as it’s just a glitch mechanics can’t pick up any problems and it never happens when you try to show them! Anyways got my cable replaced and hasn’t happened since :) good luck! X
ARTisticJcH from Australia 6 years ago
Thankyou so much!! Just saved me a small fortune xox
Emily from Australia 6 years ago
I know ! They told me was $370 just to check the computer aw hell no! Let me know how you go x
ARTisticJcH from Australia 6 years ago
Messaging my mechanic right now haha will let you know how i go. Thankyou again hun xox
Emily from Australia 6 years ago
How did you go???? Has it stopped ??
CassiG from United States 2 years ago
I will be replacing my negative cable & battery tomorrow. Battery is in last quarter of life anyway. I'm having this exact issue when I brake & do anything else such as tuen signal, window, radio... will report back if this in fact fixes it.
Luis from United States 10 months ago
I have been having the same problem thanks I'll be changing my negative cable
ARTisticJcH from Australia 10 months ago
Check your coolant for oil. Issue with mine was oil in the coolant. Had it repaired and the electronic issues stopped but happened again about 6 months later. Ended up trading it in. My mechanic and also the car yard I traded it to both mentioned it is a very common issue with the cruze.
Comment

Keylock on the dashboard

Chevrolet Cruze 2011  220 miles
My car doesn't want to start it is cranking but not picking up due keylock and code 67, no power on the injectors but fuel is coming to engine, my is a diesel. It s button start keyless.
Ndafenongo Elia from other 3 years ago  
ND
16 reports 

Code n95 appearing on the dashboard all the time

Chevrolet Cruze 2011  160000 miles
Err0r code n95 appearing on chevrolet cruize all the time tried to diagnonise the problem at vain my mechanic does not understand kindly help
DOUGLAS from other 3 years ago  
DO
2 reports 

Engine won't start SolvedSolved

Chevrolet Cruze 2012  5600 miles
It's the second time I have this problem: while using the electronic key I can open the car, but it doesn't start when I press the "start" button, and in the screen I get the text "Error code 67". According to the instructions I tried using the emergency start putting the key in the designated place but nothing changes. The lights in the dashboard won't even turn off. After around 10 minutes, the car starts like nothing happened. I would like to know if anybody else had this problem and knows why it happens and how to fix it. Thank you!
ury from United States 8 years ago  
UR
16 reports 
Solved
Best answer (according to ury)
Antoinette from United States 8 years ago
Dear fellows, I also have a Cruze and yesterday the starting system failed because of the Error Code 67 (steering lock) which is related to a switch underneath the steering wheel. They say there are a lot of cases with the same problem. Good luck!
Antoinette from United States 8 years ago
I have fixed my problem with the infamous code 67, it's due to the fact that at some point I forced the steering wheel with the vehicle turned off, and since it is so fragile for being completely electronic, I broke the lock it has. I was forced to buy a new steering wheel lock system.
shay from United States 8 years ago
For me the final solution was to take it to the service and reset the computer, just as they said there when they first saw the error. The problem hasn't appeared again after three months.
Bender from Australia 7 years ago
The car just makes a clicking sound then I let the park brake off put my foot on the brake then the clutch and it starts no problem
Ali12345 from other 5 years ago
Guys i had the same problem i had to wiggle the box under the steering to make it work. I dont knw if the problem will cone back again.
Comment

Is it my O2 sensor for my camshaft SolvedSolved

Chevrolet Cruze 2011 Sedan, automatic  110000 miles
My car's had really bad gas mileage in it started stalling in the other day it finally went lost all power and all the lights came on on the dash but they're all off now could you tell me what might be wrong
Michelle from United States a year ago  
MI
1 report 
Solved
Best answer (according to Michelle)
Bruce from United States a year ago
The issue you're describing with your 2011 Chevrolet Cruze could potentially be caused by a faulty oxygen (O2) sensor or camshaft sensor. The O2 sensor is responsible for monitoring the amount of unburned oxygen in the exhaust and adjusting the air-fuel mixture accordingly. If the O2 sensor is not functioning properly, it can cause a decrease in fuel efficiency and potentially result in the car stalling. Similarly, the camshaft sensor provides information about the position of the camshaft to the engine control module, and if this information is not accurate, it can result in a loss of power and stalling.
To determine the root cause of the issue, I would recommend having the vehicle scanned using a diagnostic code reader. This will retrieve any stored trouble codes in the engine control module, which will provide further information about what may be causing the problem.
Michelle from United States a year ago
Thank you so much. I have been having trouble ever since I got this car. Always the same problem
Comment

Stalling shuts off

Chevrolet Cruze 2014 4 door 47000 miles
Car is stalling and then shuts off, seems likes its gasping for gas check engine light just turned on it aslos says stabili track ans traction control, thehen i took the gas cap off shows signs of water what is the problem
Sara from United States 8 years ago  
SA
13 reports 
Jackie from Australia 7 years ago
Did you find what causes this I seem to be having a similar issue.
Jake from Australia 6 years ago
Hi I was hoping that you ended up finding out the problem with the stalling an engine light etc only way it runs is with axelaration when starting sometimes doesn't
LAM90 from United States 6 years ago
Please look this up. I also have a 2016 chevy cruze and have been fighting to get something done due to this same issue. Please call the GM corporate offices and complain as well file with the NHTSA and BBB if need be. They have blown me off and don't care to help. Below is the PIP bulletin for this. https://gm.oemdtc.com/7914/pip5507b-st…
Maxie from Australia 6 years ago
I have a 2011 cruze deisel i had to replace 2 computers with in a year lucky still un warrenty then the engine harness had to replace then as they fixing that the computer wasnt capactable so ince again anothwr computer now engine light is on im selling this headache as holden charges you 150$ to check out wots wrong. Not a good car to buy.
Ujw1 from United Kingdom a year ago
Same issue for me. TCS and ESP lights come on too!
Comment

Shakes between 1500-2000RPM code 84

Chevrolet Cruze 2012 Hatchback  60000 miles
Hello

I bought a Holden cruze turbo diesel 2012 6 speed manual transmission (same engine as Chevrolet cruze).
My car shakes back and forth between 1500-2000RPM, sometimes late response or no power when I accelerate, or accelerates alone when I use the accelerator. Code 84, DPF, engine lights flashing

Have you ever encountered these problems?
Will from Australia 6 years ago  
WI
13 reports 
Wardy from Australia 6 years ago
Hey mate my car is doing the same have you had the problem fixed yet if so what was it cheers blake.
Winfrey from South Africa 6 months ago
I can help u with that problem I know what courses that
Will from Australia 6 months ago
The problems were caused by faulty DPF and clutch
Murat Gaziantep from other 5 months ago
Krank sensörü okuyucu
Comment

Wont start and engine light stays on

Chevrolet Cruze 2013 Sedan 30000 miles
Just went to start my car and without any prior indication that there may be a problem...it won't fire up... It cranks over ok but doesn't even look like starting... The engine light stsys on too.
Rowdy. . from Australia 7 years ago  
RO
5 reports 
Rowdy. . from Australia 7 years ago
Problem sorted... apparently what can happen is... if you start your car shift it 10 metres and then turn it off and leave it... It can trap fuel in the system and flood it... it will not start unless you put the accelerator to the floor... common problem...
Comment

Won't start

Chevrolet Cruze 2013 Manual, 90000 miles
I hop into the car to leave for work but the engine won't start. No sparks so I know it's not the battery. The engine light is on.
1
Toomataf from Australia 7 years ago  
TO
8 reports 
Toomataf from Australia 7 years ago
I found that the cable connection between the fuse box and the battery was loose.
Comment

It shows code 84 and engine light

Chevrolet Cruze 2011 1.6 28340 miles
It shows code 84 and engine light
[email protected] from South Africa 7 months ago  
LE
1 reply 
Winfrey from South Africa 6 months ago
Hi letlogonono I'm able to help u with that problem
Comment

Error cod 71

Chevrolet Cruze 2010 hatch bag 80000 miles
I changed battery then the error code71 appeared on the dashboard screen
shwan from other 5 years ago  
SH
6 reports 
MSCdut from Canada 3 years ago
Перчатки Wally Plastic - оптовые поставки в во все регионы России. Низкие цены для мелкого и крупного опта.
Тел: +79147116482 Дмитрий
Comment

ABS indicator

Chevrolet Cruze 2010  70210 miles
When driving at 50 mph, suddenly the ABS indicator turned on, I turned off the engine and, when starting it again, the indicator was no longer there. One week later, the ABS appeared again. Suspension, brake pads, wheel hubs and drum brakes have been checked but no failure has been found. It was scanned and the failure was indicated to be in the left front ABS sensor, so it was changed but, two days later, the indicator appeared once more. When scanned, the same failure is indicated, so it the left sensor was replaced again and that same day the ABS indicator turned on. I would like to remark that once the indicator appears, I turn off the engine, start it again and it is not there any more. Does anyone have any idea what might be happening?
LEMUEL from United States 8 years ago  
LE
3 replies 
crys from United States 8 years ago
Two damaged sensors from the same side and in the same tire... that seems to be a failure in the wiring.
Dorinda from United States 8 years ago
You need to re-calibrate the turning sensor to zero, which is done with a scanner gm tech2.
Sizwe from South Africa 3 years ago
My car just turned off while I was going then after that it refused to start I got someone to diagnose it they said it sensors I changed them but still I called another mechanic he came he said it coil pack n EGR valve and I changed it but still my car when it start the engine shakes and after reading everything it turns off and it making sound in the aoxhust "bba bba bba" it does have power I need help I've tried my best
Comment

It shows engine light and code 84

Chevrolet Cruze 2011 1.6 289300 miles
It shows engine light and code 84
[email protected] from South Africa 7 months ago  
LE
1 report 
Winfrey from South Africa 6 months ago
Hi there I see it's 2 years ago' u having this problem but I can help u with that problem today if u still have that Chevrolet Cruze
Danie from South Africa 3 months ago
I have a Chevy Cruze Automatic (2.0 Diesel) and it keeps on giving me error code 84 for the last couple of days. What can i do to resolve the problem?
Comment

Vehicle not turning over

Chevrolet Cruze 2013 Sedan 90000 miles
Dash lights on but car not starting and relay clicking
Kellie from United States 10 months ago  
KE
2 reports 
Chrivia from United States 6 months ago
Trying to find out what could cause relay to trip.
Comment

Error code 95

Chevrolet Cruze 2010 Sedan  170 miles
All lights on dash but error code 95 comes on when trying to start car very weak like not enough power to kick car over help plz
Viviann from Australia 8 years ago  
VI
26 reports 
Ceekay from South Africa 2 years ago
But mine is not starting at all,it even count 00000miles and show code 95 when turning a key this problem came after i stucked in a water flood. Can somebody please help🙏
Comment

Engine check light

Chevrolet Cruze 2010 Sedan 255000 miles
Check engine light is on. The vehicle is running fine
S .M from South Africa 3 months ago  
S.

Error code with engine light on

Chevrolet Cruze 2012 Sedan 115142 miles
My car throws out 2 errer codes. P2188
P0172
It doesnt have the power it use to have and is very hight on fuelage
Jacobus from South Africa 5 months ago  
JA

The car stalls after being stopped at a red light

Chevrolet Cruze 2017 Premier hatchback  80250 miles
I guess it has something to do with the start/stop system cuz when I'm stopped at a red light and I go to push the gas so when it goes to turn on it stalls out so I've been driving in the L gear L6 to be exact... because I find out that's like kind of like a manual it doesn't use the start/stop system so I don't have to sit there at a red light with cars behind me trying to turn my car back on so I can go instead of blocking everyone I hate this car
Star from United States 9 months ago  
ST
1 report 

My car it's going well when the engine light comes out

Chevrolet Cruze 2010 hatchback, manual 250000 miles
It loose the power n rejuce the power so I have stop and remove the terminal from the battery to rest it
mogabe from South Africa 3 years ago  
MO
5 reports 

Check Engine light

Chevrolet Cruze 2014 1.4 L turbo 80000 miles
Car had some trouble starting on occasion this week, more of a delayed start really but it's defiantly taking longer than normal. Everything was driving fine nothing seemed to be wrong but now the check engine light is on?
Savannah from United States 3 years ago  
SA
10 reports 

Check engine light

Chevrolet Cruze 2014 Hatchback automatic 79000 miles
Won't show and does not start
Terrance from South Africa 3 years ago  
TE
1 report 

Code 67 error

Chevrolet Cruze 2012 Automatic 49000 miles
Intermittent code 67 appears on my dashboard, steering column lock error, is the module can be replace without programming?
1
Alain from other 3 years ago  
AL
5 reports 

Check engine light keep coming on code PO 171 run rough

Chevrolet Cruze 2014  740000 miles
Have change valve cover and both 02 sensor still come PO 171
Dick from United States 3 years ago  
DI
1 report 

Over heating sensor problem?

Chevrolet Cruze 2014  330001 miles
Driving down the road and all of a sudden on my display reads, air condition turned off due to high engine temp. My heat gauge reads almost hot. The display then reads normal, speedo on. The temp gauge goes back to normal. Like all of this in 30 seconds. This happened 3 times in a maybe 10 mile ride. What could it be. I know my car was not overheating. A sensor?
robin from United States 5 years ago  
RO
14 reports 

Cam shaft faulty

Chevrolet Cruze 2009 Auto sedan 9000 miles
Hey has anyone else had the issue of the cam shaft playing up? I've replaced the sensor twice and the whole cam unit itself... now the engine light is back on... running sluggish even though everything has been replaced... the solenoids have been cleaned out and everything is near new in this engine... what could it possibly be... !??? I've taken it back to Holden and they said it was the whole cam shaft so it's replaced and now the engine light is back on... getting over this
Cmaxk from Australia 7 years ago  
CM
6 reports 
Problems with a Cruze? Share them
Submit commentCancel
Submit replyCancel


Did you find the website helpful?

Thank you!