I'm just wondering if you can help. I've had to take my Holden Cruze in as it wouldn't come out of first gear. They have told me it's going to cost $1100 as it's the cable that goes from the gearbox to the gears. My problem is also I don't understand why. It's under 60,000k. Has there been issues with the cruzes. Holdens trying to tell me I've done it.

Gears stuck at park,I have to let engine run for an before they become moving, even an hour at park they can't move, advise me

The gearbox is separated from the engine.It does not select gears

Please help me to find out what is going on

When it happens in any gear the car will not go

Hello

I bought a Holden cruze turbo diesel 2012 6 speed manual transmission (same engine as Chevrolet cruze).
My car shakes back and forth between 1500-2000RPM, sometimes late response or no power when I accelerate, or accelerates alone when I use the accelerator. Code 84, DPF, engine lights flashing

Have you ever encountered these problems?

Automatic Shifter stuck in park, kindly assist

Gearbox locked on 4th gear what could be the problem

I have a Chevrolet Cruze and I would like to share all its problems: the calipers are distorted which is a really dangerous problem if you do not notice it on time, the automatic transmission locks in 3rd or 5th gears and even the engine stalls when driving.

while i was driving i put it on gear 1 now its stuck on gear1 it doesn't change gears anymore

After driving 2000 miles on holidays, I felt a hit in the gearbox and inmediately the Checking indicator turned on. In the agency they told me that there were some computer codes that had not been erased on the last car maintainance. After that, a new failure appeared: the gearbox remained in its security position in 4th gear, no other could be put and the sequential transmission remained desactivated. I was then told that the automatic transmission's valves body needed to be replaced. Luckily, a mechanic told me it had to do with the oil never being changed by Chevrolet's agencies. He then changed the vehicle's oil and repaired the valves and now the gears are working perfectly. Hope it helps someone!