Brake light do not working

The truck was doing fine and then all of a sudden the parking break light came on the dash. There is plenty of brake fluid. We checked that and the emergency brake works too. So why would the light be on.

Brake lights and blinkers stopped working

Brakes lights went out at the same time. I have checked all known fuses, changed all bulbs, changed brake light switch, checked wires, cleaned all wiring

At the back brake brake fluid all around the tire and I wanted a truck and on the ground

Break peddle is soft and spongy

My van has got the brake too down but, as it is a vehicle with discs in each of the wheels, it does not accept any brake pads repair. What can it be?

I was pulling trailer and my brake system light came on then it died. It will not start doesn't even try to start. Brake system light is on security light and battery light is on. With key off all my gages and running lights stay on

I recently had an issue with the Battery Distribution Engine Compartment Fuse Block (see pic)
Truck would not start. Zero power. As a quick fix we jumped two of the terminals and that got it started. However, I have no running lights. Everything else works including headlights, brake light and blinkers. Because the Battery Distribution Engine Compartment Fuse Block will not arrive for a few days and I need to drive in the evening, I was hoping a mechanic could tell me if there is a temp fix by maybe jumping the terminals while I wait for the part to arrive. I currently have a 30 Amp inline fuse fuse so the truck will run. Please help

Motor does not turn over theft light is on and stays on even when key is out

I have no headlights, dashboard lights, radio, no turn signals, hazards (flashers), the motor isn't shifting right and can't go over 45 mph it won't let me, the the speed odometer, gas, no power to windows but if I hold the brake pedal to the floor everything starts to work with warning lights on?

My truck, although it had a hitch and all the trailer light connectors and such, both multi prong and 4 prong options, but it did not come equipped with a trailer Break Controller... I ordered a OEM original trailer break controller, and customized the panel to a perfect fit, there was a cable connection that is for the trailer brake controller behind the panel and plugged in a dummy hole, (since I didnt have that option equipped I only had a little change pouch in the panel... I cut it out, custom fit for the OEM controller, the connector for it via the cable that was already there in place (… Read complete

Won’t turn over while pressing down on brake pedal

Hey I've just bought a 1998 5.0l Chevy Silverado and I've had everything redone in the breaking system master cylinder all calipers all of the pads and lines and the booster but we can't get the air out of the system we have bench bled the master multiple times and no luck, every time we get tension we start it up and all the pressure leaves we've even bypassed the abs just incase that was the problem. So I need some help on to how to get my breaks working thanks!

You have to tap brakes truck shuts off but radio and other dash lights st@y on so have to undo battery when ready to start you have to first turn key switch on pull gear levér to nutruel then reconnected battery and crank then as long as you dont put into park youcan move gear lever

Towed cattle trailer one evening & all trailer lights (LED) worked fine. Backed into drive & shut off. Next morning, used remote start. Vehicle started & vehicle lights came on, but no trailer lights now. Fuses 1, 4, 7, 11, & 26 all good via ohmmeter. No trailer clearance & running lights. No L or R trailer signal lights. No trailer brake lights. Remote start works fine on vehicle as do brake, tail, head lights, & turn signals. Any suggestions???

I have this problem when I apply my brakes, just as I'm about to stop my brake pedal has a slight vibration and creaking sound that is driving me crazy. Also pedal is softer than usual. Pads and rotors are good, pls. Help.

I was pulling trailer and my brake system light came on then it died. It will not start doesn't even try to start. Brake system light is on security light and battery light is on. With key off all my gages and running lights stay on

While in four wheel drive when im turning while backing up it feels like there is a brake being applied any one have an idea what wouls cause that