Truck falls on its face when I give it some gas. Then it won't shift once it gets going. Instrument cluster keeps going out.

The truck won’t shift into fourth year and the overdrive light on the shifter continually blinks. I replaced it, but it still doesn’t shift into the right gear, and now I lost power to the windows to the dashboard to the overhead lights and the radio.

Truck will not start or run with ignition ignition can be turned on and truck started from the outside there is no Prindle light on dash when truck is started will not shift out of third gear

Few seconds ago

Overdrive light is flashing replaced the shifter, but it still flashes truck runs great but wanna leave third year and now the power windows radio and overhead light oh shut off on me have the transmission rebuild that didn’t fix it. That was a waste of 2500. I’m hoping that it power drive module or one of the other modules. It seems to be an electrical or sensor problem that’s for sure what Power drive module or one of the other modules. It seems to be an electrical or sensor problem that’s for sure.

I can do the bypass. No excessive play in shifter. Brake lights work. Looking for ways to test the wiring to track upstream starting from the fuse box and using an ohm meter at the solenoid wiring harness.

I installed switchback LEDs on my 2014 F250 and have a very odd problem
I have installed resistors and that has fixed the hyper flash but another issue is driving me crazy
When the ignition is in run but the truck is not started the switchback LEDs work exactly as they should white running light amber signal and hazard. Great looks amazing!

Now the problem as soon as I start the truck and turn on the running lights the white lights work but don't switch to Amber when signalling they don't flash at all
When I turn off the running lights the LEDs flash. Sometimes Amber sometimes white sometimes both colours intermittent

Why is this and how do I fix it