ABS indicator
Chevrolet Cruze 2010 70210 miles
When driving at 50 mph, suddenly the ABS indicator turned on, I turned off the engine and, when starting it again, the indicator was no longer there. One week later, the ABS appeared again. Suspension, brake pads, wheel hubs and drum brakes have been checked but no failure has been found. It was scanned and the failure was indicated to be in the left front ABS sensor, so it was changed but, two days later, the indicator appeared once more. When scanned, the same failure is indicated, so it the left sensor was replaced again and that same day the ABS indicator turned on. I would like to remark that once the indicator appears, I turn off the engine, start it again and it is not there any more. Does anyone have any idea what might be happening?
3 replies
CR
Two damaged sensors from the same side and in the same tire... that seems to be a failure in the wiring.
Vote helpful-1
DO
You need to re-calibrate the turning sensor to zero, which is done with a scanner gm tech2.
Vote helpfulSI
My car just turned off while I was going then after that it refused to start I got someone to diagnose it they said it sensors I changed them but still I called another mechanic he came he said it coil pack n EGR valve and I changed it but still my car when it start the engine shakes and after reading everything it turns off and it making sound in the aoxhust "bba bba bba" it does have power I need help I've tried my best
Vote helpfulRelated problems
Half the turning indicators dont work
Cruze 2013 hatchbackRight front, drivers side small indicator and left rear are the only ones going
I've replaced all the bulbs but the ones that i replaced are not faulty or blown
I cant seem to find a fuse that says…
1 replyAudio and indicators
Cruze 2011 SedanRadio is not switching on or showing anything on the display as well as indicators are no longer clicking I've checked and replace the fuse no 4 n 5 but the problem still persist i also checked the ne…
Radio and dash glitching and indicator muting
Cruze 2011 Turbo 6spd manualWhen using the brake or indicator the radio will start glitching aswell as the lights and dash. It’s so annoying I’ve read it could be the negative cable but has anyone else experienced this and fixed…
8 repliesABS indicator
Altima 2006 I was driving on a highway when the ABS indicator appeared on the dashboard and, at the same time, the stereo stopped working properly. An annoying noise appeared, and remained even when I turned off…
3 replies4WD and ABS indicators
Montero 2005 Without having the 4WD activated, its light indicator blinks in the dashboard and, when braking, the abs turns on as well. When moving the lever, the abs light turns off.
1 replyABS light on
Corolla 2007 The ABS light turned on, I cleaned the front wheel's ABS sensor and it turned off. As I started the car again, the light was on, I removed it and the next time I started it was on once more but this t…
1 reply
Did you find the website helpful?
Thank you!