Door problems

Top problems

Error code 67 Solved

Chevrolet Cruze 2012 23000 miles

Error code 67 appeared to me and, as I've read in the handbook, it has to do with the steering column. When turning of the car and opening door, a strange noise can be heard. I assume it is the steering wheel's lock. Does anyone know how to solve it?

Peter from United States 9 years ago

Comment

Same issue here

10 reports

JUDI85 from United States 9 years ago

The error code 67 is an error between the comunication of the bodywork module and the steering column one. In the steering column module there is a device that reads the steering wheel's position and, when reading it inappropriately, the bodywork module determines that its state is not the right one to start, nullifying this function. The problem is within the column module, where a latch locks or breaks. In most of the cases, the problem can be solved by hitting softly the steering column module, located right under the column itself and to access it you simply need to remove the underlying plasic, which has four screws. Others say that, only by moving the direction, when pressing the start button again there will be no inconvenients. Good luck!

Vote helpful

Best answer (according to Peter)

Peter from United States 9 years ago

If the noise when you open the door is longer than usual, you should take your car to some workshop because it is the steering column module that is failing.

Vote helpful

Paul from Nigeria 4 years ago

The steering module device can be fix without going to any workshop if only you have the time to figure it out... you need to know what the steering module is it under the your car steering area inside, just lose it out and clean up the old grease inside and check if the small motor inside is okay if yes just it will work for you and the error will be gone once you complete this process. Make sure that you grease the device back before mounting it back good luck

Vote helpful

Comment