No power supply to obd2plug
Hyundai Accent 2001 1.5manual 180000 miles
Why are both wires to the crank positioning sensor getting power
Related problems
Starts sometimes
Accent 2003 4 door/ sadan Car starts up sometimes, had a crank shaft position sensor put in but it still starts sometimes
1 replyCar won't crank when hot
Accent 2005 1.8Spins over won't crank when hot cranks fine after awhile
Climate control blower not getting power
Accent 2007 2007 hatchback standardBlower not working , its -24c checked fuses inside x1& engine compartment x1 + x1 relais , made swap , checked if power to blower resistance "none" then removed center panel & tested speedswit…
No power to coilpacks
F-150 2005 5.4No power to coilpacks cranks no start
1 replyCranking not starting
Corsa 1997 Corsa 13neNot getting positive feed to the crank sensor from ecu what could be the cause
Parking sensors in front not working
SRX 2015 3.6lParking sensors not working replace all new wiring and sensors
Did you find the website helpful?
Thank you!