Stalls when accelerating over 2500 rpm
Hyundai Santa Fe 2001 139000 miles
At the beggining, it started stalling when travelling long distances. But, a week later, it started being more and more frequent and now it won't start.The scanner indicates a code which talks about high speeds and a short circuit. I would appreciate your help.
1 report
AR
I recommend you to check the flow and the turning sensor of your vehicle. If this is damaged, it causes the car to stall. Try first cleaning them with an appropiate cleaner for electrical pieces, disconnecting the battery for half an hour, connecting it back and only then giving it a try.
Vote helpfulPE
It is a sensor located behind the engine, which you should change or else you will have this problem forever.
Vote helpfulRelated problems
Engine light is on giving codes p1529 p0750 and p2600 and it stuck in
Santa Fe 2001 2.7 v 6Codes p1529 p0750 and p2600 and stuck in 3rd geer
1 replyIntermitten no start
Santa Fe 2013 2013 HYUNDAI SANTA FE series GL 3.3L V6So Randomly doesn't start sometimes keep trying and eventually does. No codes reading, not alternator, battery, starter, and when turning key all windows, display, lights, radio ect have power. To the…
1 replyProblems starting,idling & often losses power while driving
Santa Fe 2002 2.7 literThe Diagnostic results from auto zone states that ALL cylinders are misfiring. I replaced the spark plugs, wires, & coil packs all within the past 6-8 months ago. I have recently noticed a small a…
Stalls
Jetta 2001 After driving for 20-25 miles, the engine stalls and it won't start again. Only after 4 or 5 hours the car will start again as if nothing had happened. After the same distance, it stalls once more and…
Solved2 repliesStalls
Mondeo 2003 After a major repair, the car was left wonderful, with a good idle speed sound. But its problem now is that, when accelerating deeply, the heater failure indicator turns on and the car stalls. The sca…
1 replyStalls when driving
Sportage 2008 I really do not know what to do because my vehicle suddenly stalls when driving. It is only after 10 minutes that I can start the engine again but then the Check engine remains turned on. The scanner…
3 replies
Did you find the website helpful?
Thank you!