Spark plugs wires connection
Kia Sephia 2001 180541 miles
My vehicle had a failure in the spark plugs wires, so I decided to change them. But now, the problem is that I've connected wrongly. Please help me by telling me where I should connect each wire, as I've installed them all the way around and do not remember the correct one.
1 reply
SE
Start connecting them from the first cylinder.
Vote helpfulRelated problems
Faulty lamps ignition
Sephia 2001 When turning the lights on, only the right dipped-beam headlamp and the left main beam headlamp turn on, or the other way around. I've checked the fuses but they seem to be alright. What else might it…
1 replyThree cylinders change
Sephia 1993 The engine starts perfectly but, at 2000 rpm, it sets at three cylinders and, if I keep accelerating, it starts working properly. I've already changed the distributor cap and spark plugs but the failu…
Solved2 repliesVibration when accelerating
Sephia 2000 Hello, my Sephia has a failure that appears intermittently, every now and then. When starting to drive at first gears, every time I accelerate, the car vibrates. As I release the accelerator, the vibr…
3 repliesColor of wires
Cavalier 2003 RadioCan’t tell what wire is the illumination wire as 2 of them are grey
Wiring problem
Ram 1500 1998 Long bed 5.2I have wiring problems with the green and orange wires that run injectors and coilq
2008 Yukon wiring issue
Yukon 2008 6.0My wiring harness got cut and I need a diagram so I can tell where each wire from the drive by body wiring harness
Did you find the website helpful?
Thank you!