Stalls problems

Top problems

Stalls when driving

Kia Sephia 1996  300000 miles
Some days ago, the cylinder head was serviced and the valves adjusted, because my car had an oil leakage that damaged the air sensor. At the same time, almost all the sensors were cleaned. However, it now happens that, when starting to drive, the vehicle suddenly stalls. The fuel pump has been checked and it seems to be alright. But the failure is still there and I do not know what else to check. Could you please give me your opinion?
rick from United States 9 years ago  
RI
1 report 
Wilhelm from United States 9 years ago
Hey, your problem is in the immobilizer, which you need to either replace or give maintainance.
Flick from United States 9 years ago
Hello everyone. The problem you have is that the steering wheel sensor is damaged. I tell you because this has already happened to me.
Comment

Chokes when warm

Kia Sephia 2000  263000 miles
Hi, buddies. I have a Kia Sephia II 2000 and its problem is that, when reaching half of the temperature, it starts choking. I then accelerate and it does not respond. I stop it, start it again and it works properly but only a block and the same occurs. I have already changed coils, fuel pump, wires, filters and nothing was solved. The scanner does not indicate any failure. I do not know what else to do.
bige from United States 9 years ago  
BI
1 reply 
carthaette from United States 9 years ago
I also have a Kia Sephia 2000 with the same choking problem. I've changed the catalytic converter but nothing changed. I am now thinking about replacing candles and wires; I'll then tell you what happened.
Comment

Spark plugs wires connection

Kia Sephia 2001  180541 miles
My vehicle had a failure in the spark plugs wires, so I decided to change them. But now, the problem is that I've connected wrongly. Please help me by telling me where I should connect each wire, as I've installed them all the way around and do not remember the correct one.
Ginny from United States 9 years ago  
GI
1 reply 
Sebby from United States 9 years ago
Start connecting them from the first cylinder.
Comment
Problems with a Sephia? Share them
Submit commentCancel
Submit replyCancel


Did you find the website helpful?

Thank you!