The fittings that connect to the head and there are two of them are made of plastic which obviously being plastic and so small are both broken probably due to engine heat and the hoses connected to them at just sitting there and its running rough on idle and when the aircon is turned on. If I know what these fittings are called I can order new on ebay so Im looking for the name of the parts, I cant just order vacuum hose engine sensors they must be called something, widget, gizmo, etc?

The rear reverse sensors operates continually without other vehicles or objects around it, when driving and when parked with the ignition on

Toyota dealership suggested problem may be "sensor" at time I delivered to dealership. Toyota replaced clutch switch Assy. According to invoice. Car starts a little better (without pushing in pedal so many times) but still will not start at times - e. G. , have to push clutch in several times(3 to 4) and while holding pedal in, I rotate my foot on the pedal.

Hi, my engine management light comes on whilst driving maybe once a week. Then goes off after I restart car. I have had the camshaft sensor replaced as this is what the fault code was signalling. However, the light still comes on but not so often as before. I have had many different diagnosis from garages /mechanics (without seeing the car). I have been advised to get the serpentine belt changed, timing chain slipping, wiring fault or sensor is misplaced. Can anyone shed any light without me having to spend a fortune please? It is a vvt-i petrol engine. Thank you

The ABS light turned on, I cleaned the front wheel's ABS sensor and it turned off. As I started the car again, the light was on, I removed it and the next time I started it was on once more but this time there was no way I could remove it. How can I reset the ABS system?

My car has a high consumption of fule i changed map sensor,oxygen sensor still its the same what shall i do?

Crank, no start. No spark, no fuel activity. 1st code p171. Replaced MAF, both O2 sensors, pcv, iridium spark plugs twice, oil change and both oil/air filters.

After failing nct on emissions on my Toyota Corolla 1.13 new lambda sensor fitted & reconditioned catalytic convertor. Emissions shot up to 6.1, was my catalytic convertor better than the replacement ???

Smogtec says I need to change catconverter and replace the O-2 sensors