It was used to jup start another vehicle and now it won't start. I can turn the ignition on everything inside has power and works but it won't start. You can turn the key to start but the car won't start, while turning the key you can smell fuel, I'm just wondering does the computer need to be rebooted & if so can I do that myself?

When driving, the vehicle suddenly stalled and I have not been able to start the engine since then. The computer, camshaft and 2 other more sensors have been checked and they are all working properly. There is no spark.

changed fuel pump , changed o2 downstream ,replaced maf, replaced cam sensor, vehicle was running good after i changed relay for fuel pump . now again its acting up no start again, pulled a plug and it was wet , so no spark? what is going on ?

I changed the head gasket after over heating of the engine caused by lake of water in the radiator. Before changing the radiator the car was starting well bt after changing the gasket its now don't starting

The technician removed the BCU unit improperly and the car shut down. He is trying to reprogram key but dealer refused. Trying find an alternative way any ideas ?

Shut off after getting home went to go to work and wouldn't start. There is no clicking sound all bells and whistles working fine headlights are bright. Does anyone know what this could be.

The brake lights remained turned on, the brake bulb was replaced but it did not want to start working properly. It turns on for 2 seconds and turns off. Injectors have got pulse and the coils are alright. Even the fuel pump is in perfect state. Please someone help me. Thanks.

After starting sometimes stalls and is difficult to start again. Once running is ok but on occasion will just stop whilst driving. The diesel plug light comes on and sometimes won't go off or start. Then the warm up plug goes off and it will start again. Also the icon with the skidding car comes on when shuts down. Any ideas?

Engine would not start last week. Towed to Nissan dealer. They replaced the camshaft sensor. I had already replaced it myself twice during the last week. C$360. That’s a lot to me. Now the check engine light has come on again. Sure enough, bad camshaft sensor code, P0340. Hat to take it to the dealers again, but it is on warranty.