Computer problems
Computer: Engine Control Unit. It regulates all the aspects related to the engine's proper functioning.
Read more
More specific problems:
Related problems:
See owner's manual
Top problems
Dash board computer
Nissan Almera 2003 almera tino sve 91567 miles
The computer keeps saying secure what does it mean can anybody help me
2 reports
Power loss when accelerating
Nissan Almera 2005 115000 miles
My car does not accelerate, it loses power instead. It has been checked with three different scanners but no failure was indicated. I've checked the fuel pressure and it is 48 pounds. I've changed the positions of the camshaft and crankshaft sensors as they are the same, I've cleaned the injectors, the throttle body, the MAF sensor, but the car is still the same. Has anyone had this problem? I have my doubts with the VVT valve as, if it fails, it is not detected by the ECU and it affects the engine time and performance.
13 reports
Hi, if you are still with the problem, check that the 3 of the stop lights are working, as the car loses power if one of them fails. Hope it helps and good luck.
I spent a whole day trying to find this fault and it turned out to be both brake light bulbs. Never in my 35 years as a technician have i seen this problem without a fault code. Massive Thanks to you.
I've changed the MAF sensor for a Sentra one and the power loss problem was solved. You can try replacing yours with a Sentra or an Altima sensor, good luck.
My Nissan Almera just stop while running they said maybe it can be an air flow sensor okay they said I must not close petrol cap so it works it means the car doesn't brethren so I guess I need to clean up my throttle body
CommentCoil failure
Nissan Almera 2002 2000 miles
Even though the four coils are working, coil number 1 has no spark. I was told this has to do with a computer failure. The strange thing is that sometimes it works and others it does not. I've already changed all the coils and only one of them does not spark. What can it be?
23 reports
Hey when the coil are not working how the my Nissan almera act
Hi guy I've got the same problem no spark I've bought four coil plug and Crank sensor but still not spark,the engine sing is on dish board,what it can be WhatsApp me on 0603413594 plz
Manmanemanr from other a year ago
Cheers mate...one of the posible cause is the ecu not sending signal to the coil...just check the pin for signal at the coil socket harnes side with test light you will found no ground wether power on or off...you can compare to the other 3 socket to double confirm
[email protected] from South Africa 8 months ago
I have seen more questions than answers. What is this platform for?
CommentNATS error code
Nissan Almera 2004 136000 miles
The immobilizer light is turned on, which indicates there is a failure in the NATS or immobilizer system. The vehicle occasionally stalls and starts without a problem. But there are some other occasions, which have been more frequent lately, in which the engine does not start working again after it stalls.
3 reports
You need to change both the crankshaft and camshaft sensors and then reset your computer.
It's been done by the mechanic recently still having a problem do I need to change the cam chain
I need help what can the fault in the Almera twin cam 16valve parked the car for a month now it not starting , the fuel is coming well as spark is there what can be the cause
Comment2001 Nissan Almera No spark not the coils not the sensors no the ecu.
Nissan Almera 2001 220000 miles
Not the coils not the ecu not the sensors. What else can it be?
3 reports
No spark Nissan Almera 2001. Not the coils not the sensors not the ecu. What else can it be?
CommentWon't start
Nissan Almera 2001 Saden 3000000 miles
Won't start from ignition switch on going on and full pump not going on but if I push computer rely together fuel pump goes on but not starting
1 reply
If the car is not starting and the fuel pump is not turning on when the ignition switch is turned on, it could be a problem with the ignition switch or a malfunctioning component.
Here are a few things you can try:
Check the ignition switch. The ignition switch is responsible for turning on the fuel pump and other systems when the car is started. If the ignition switch is not functioning properly, it can cause the car to not start. You can check the ignition switch by inspecting it for any visible damage or wear and by testing it to see if it is functioning properly.
Check the fuel pump relay. The fuel pump relay is responsible for turning on the fuel pump when the car is started. If the relay is not functioning properly, it can cause the fuel pump to not turn on and the car to not start. You can check the relay by inspecting it for any visible damage or wear and by testing it to see if it is functioning properly.
Check the fuel pump. The fuel pump is responsible for pumping fuel from the fuel tank to the engine. If the fuel pump is not functioning properly, it can cause the car to not start. You can check the fuel pump by inspecting it for any visible damage or wear and by testing it to see if it is functioning properly.
Here are a few things you can try:
Check the ignition switch. The ignition switch is responsible for turning on the fuel pump and other systems when the car is started. If the ignition switch is not functioning properly, it can cause the car to not start. You can check the ignition switch by inspecting it for any visible damage or wear and by testing it to see if it is functioning properly.
Check the fuel pump relay. The fuel pump relay is responsible for turning on the fuel pump when the car is started. If the relay is not functioning properly, it can cause the fuel pump to not turn on and the car to not start. You can check the relay by inspecting it for any visible damage or wear and by testing it to see if it is functioning properly.
Check the fuel pump. The fuel pump is responsible for pumping fuel from the fuel tank to the engine. If the fuel pump is not functioning properly, it can cause the car to not start. You can check the fuel pump by inspecting it for any visible damage or wear and by testing it to see if it is functioning properly.
CommentEcu and key coding
Nissan Almera 1999 Sedan 2.0 manuel 205000 miles
I have no spark ecu and key chip does not wana start the car
3 reports
Injector problem
Nissan Almera 2006 seden 209000 miles
It does not open injectors for petrol to flow to the engine. I don't whether its a computer problem or what please help.
8 reports
Nissan Almera 1.8 2005
Nissan Almera 2005 1.8 116hp 85kw 150000 miles
My Nissan Almera 1.8 2005 starts normaly and after 25-30 km the engine stops working and can not be started 1-2 minutes, after starting, the problem repeats in shorter period. The check indicator is turned on. I have made computer diagnostic and it shows 3 errors:
P0340 cmp sen/circ-b1
P0011 int/v tim cont-b1
P1612 Chain of ECM-IMMU
Both the crankshaft and camshaft sensors have been replaced, but the failure remains and it keeps indicating there is a problem with the crankshaft sensor. I do not know what else to do, can you help me please? Thank you in advance.
P0340 cmp sen/circ-b1
P0011 int/v tim cont-b1
P1612 Chain of ECM-IMMU
Both the crankshaft and camshaft sensors have been replaced, but the failure remains and it keeps indicating there is a problem with the crankshaft sensor. I do not know what else to do, can you help me please? Thank you in advance.
30 reports
Problems with a Almera? Share them
Did you find the website helpful?
Thank you!