Sensors problems
Sensors: Electrical device that measures the different performance parameters of the car.
Read more
More specific problems:
Related problems:
See owner's manual
Top problems
2001 Nissan Almera No spark not the coils not the sensors no the ecu.
Nissan Almera 2001 220000 miles
Not the coils not the ecu not the sensors. What else can it be?
3 reports
7
JA
No spark Nissan Almera 2001. Not the coils not the sensors not the ecu. What else can it be?
Vote helpful
CommentStarts but does not accelerate
Nissan Almera 2007 138000 miles
Good afternoon, I have a Nissan Almera 2007, which starts but does not accelerate. The first failure that appeared and was detected by the scanner was a crankshaft sensor damage. It was replaced together with a coil that was failing too. The car worked properly for some days, until the engine started vibrating and losing power. This got worse with time and, today, it does not accelerate nor work properly any longer. I've checked the rear stop lights and they are working. When changing the gear to reverse the car, it usually stalls.
14 reports
According to my mechanic, the car stalls either when the reverse lights are failing or when there is a damaged sensor in the reverse box. I had your same problem and, in my case, it was a failure in the reverse lights.
I am driving a nissan almera 2003 model, the car is starting but when i accelerates it only comes up to 2500 revs and then it starts jerking. I replaced the MAF sensor as well as the throttle position sensor, but its still doing the same thing, please help
Hi did you manage to diagnose this problem, please email me [email protected],im having the same problem
All the lights go except the the engine light when I put on the ignition, car doesn't want to start, pls help
Reincarnation from South Africa a year ago
When last did you do a service on the car ?
Had the same problem, daft as it sounds mine started when I replaced back light bulbs with LEDs garage had heard about this and change them back to normal bulbs, problem fixed. Nissan know about this fault.
I've Nissan Almera 2005 model cranks but not start
Having the same problem here, please can anyone help,, my car start but acceleration not good
Hi I have a 2004 Almera, when driving and coming to a stop the rpm would go up 1500 then drop to 1000rpm,cant get the car to idle lower than 1000 rpm changed throttle position sensor, idling control sensor still have the same problem?
CommentPower loss when accelerating
Nissan Almera 2005 115000 miles
My car does not accelerate, it loses power instead. It has been checked with three different scanners but no failure was indicated. I've checked the fuel pressure and it is 48 pounds. I've changed the positions of the camshaft and crankshaft sensors as they are the same, I've cleaned the injectors, the throttle body, the MAF sensor, but the car is still the same. Has anyone had this problem? I have my doubts with the VVT valve as, if it fails, it is not detected by the ECU and it affects the engine time and performance.
13 reports
Hi, if you are still with the problem, check that the 3 of the stop lights are working, as the car loses power if one of them fails. Hope it helps and good luck.
I spent a whole day trying to find this fault and it turned out to be both brake light bulbs. Never in my 35 years as a technician have i seen this problem without a fault code. Massive Thanks to you.
I've changed the MAF sensor for a Sentra one and the power loss problem was solved. You can try replacing yours with a Sentra or an Altima sensor, good luck.
My Nissan Almera just stop while running they said maybe it can be an air flow sensor okay they said I must not close petrol cap so it works it means the car doesn't brethren so I guess I need to clean up my throttle body
CommentJerking when accelerating
Nissan Almera 2002 Four plugs 220 miles
My Almera 2002 is jerking while accelerating we have changed FUEL pump, fuel filter, airflow meter, plugs still no improvement.
11 reports
Check air intake hose for cracks (from air filter / MAF to throttle body).
When removing for inspection, take care not to make it worse - don't pull the hose! Instead start the oppposite way - by pushing it over!
Had similar issue and found cracks on my 2001 almera.
As the car / engine accelerates, it changes relative position slightly and opens up the cracks which distrubs MAF & ECU.
Have temporarilly fixed it with self amalgamating tape.
When removing for inspection, take care not to make it worse - don't pull the hose! Instead start the oppposite way - by pushing it over!
Had similar issue and found cracks on my 2001 almera.
As the car / engine accelerates, it changes relative position slightly and opens up the cracks which distrubs MAF & ECU.
Have temporarilly fixed it with self amalgamating tape.
1
2
CommentCheck indicator
Nissan Almera 2001 185000 miles
My car jerks, the check indicator is turned on and the revolutions needle is unstable. Both the crankshaft and camshaft sensors have been replaced, but the failure remains and it keeps indicating there is a problem with the crankshaft sensor. I do not know what else to do, can you help me please? Thank you in advance.
4 reports
The computer is not recognizing the new sensor. You need to install it with a good scanner.
Hi, we have the same problem with our Nissan Almera 2006. The computer shows cam sensor but we replaced it and the car still drops when its started. Computer show same prob.
CommentCar stalling jerking terribly at speed of less than 60km
Nissan Almera 1997 Hatchbavk 252000 miles
It starts easily but stalls anytime i drive at less than 60km,the jerking is worse when speed is low but when it gets to 70km and above it accelerates normally. I changed the c2 cramshAft sensors and air filter its still the same. Pls help me
21 reports
I have the same problem , i have changed the TPS still no luck. The rev counter is continously jumping when idling or driving , really frustrating
CommentNo engine check light no spark and fuel
Nissan Almera 2005 198000 miles
A client brought me his nissan almera vehicle was in a accident on the left frond side after the panel beaters finished he drove 300km home where the car stalled and since then the fuel pump doesnt prime there is no spark and no engine check light i checked wiring replaced cam and crank sensors fitted new coils changed out all fuses and relays still no start i did notice the security light flashes when i switch ign on it the light stays on
9 reports
CommentCar cuts out and jerks
Nissan Almera 2008 QG 1.8 200000 miles
Car cuts out battle to start leave it for a couple of minutes then starts again. The car also jerks under acceleration and have changed the following things the crank sensor and the fuel pump found some bent pipes by the injector rail supply and return I fixed that but problem has not gone away please help many thanks.
1 report
Stalling & jerking
Nissan Almera 2004 Sedan 260000 miles
My car was having a problem of switching off whenever i start it. And when it gets to switch on it idles nicely and drives perfectly on the highway but it stalls at times when i do urban driving. The mechanic said its the throttle body sensor so i changed it but now its staring well but has started jerking but it stalls better and it can drive , please help
1 report
Starting failure
Nissan Almera 2004 3500000 miles
I have a nissan almera 2004 model the car was working absolutely perfect,last week when I tried to start the car it started for 3 seconds then die i even change the sensor also the fuel pumper but still it doing the same thing what should i do
1 report
Nissan almera hatcback
Nissan Almera 2001 Hatchback 50000 miles
Hi have just done my motor over but when i start can it over fuels and wets the spark plugs by the head can someone please help me as and i hav check the sensors and fixed but still does tge same.
Cpk 0035 diagnostic code shows
Nissan Almera 2011 Sedan manual 125890 miles
The crank sensor keep showing engine has been rebuild and after DTC clearing sensor has been replaced and timing has been checked
Cranking but not starting
Nissan Almera 2006 1.8 100000 miles
Changed timing kit and crank and cam sensors
3 reports
Nissan Almera 1.8 2005
Nissan Almera 2005 1.8 116hp 85kw 150000 miles
My Nissan Almera 1.8 2005 starts normaly and after 25-30 km the engine stops working and can not be started 1-2 minutes, after starting, the problem repeats in shorter period. The check indicator is turned on. I have made computer diagnostic and it shows 3 errors:
P0340 cmp sen/circ-b1
P0011 int/v tim cont-b1
P1612 Chain of ECM-IMMU
Both the crankshaft and camshaft sensors have been replaced, but the failure remains and it keeps indicating there is a problem with the crankshaft sensor. I do not know what else to do, can you help me please? Thank you in advance.
P0340 cmp sen/circ-b1
P0011 int/v tim cont-b1
P1612 Chain of ECM-IMMU
Both the crankshaft and camshaft sensors have been replaced, but the failure remains and it keeps indicating there is a problem with the crankshaft sensor. I do not know what else to do, can you help me please? Thank you in advance.
30 reports
Engine light came on
Nissan Almera 2000 Hatchback 153 miles
The engine light came on, l scanned to find fault on bank 1 sensor 1which I replace, only for it to show bank 2 sensor 2 again.
1 report
Problems with a Almera? Share them
Did you find the website helpful?
Thank you!