The brake light stays on. Why would this be happening?

Thank
David

While using the brakes, the stop lights don't work

I lost brake and turn signal lights in the back. I have running lights and the brake light on the back of the cab works. Fuses good. Can’t find any apparent breaks or rubs in the wiring. I’m stumped...

Replaced fuse location 42. Still no signal.

Brake lights do not work, (third above the window does work), Turn signals work and running lights do as well.

Since the third light works I assumed it was not the switch... I checked all fuses and they were all good. I changed all bulbs, just to check and the same results.

Any ideas?

The brake lights don't come on when I push on the brakes, the horn does not work and the shifter does not want to shift from part. Has anyone had this issue before?
Thanks in advance

Ok have a 2012 Ford F150 XLT brake lights and turn signals do not come on. I have replaced the turn signal relays, the multifunction switch, the brake pedal switch, several fuses that were not. Blown but replaced anyways, the bulb socket housing, as well as wiring for brake lights, after this did not work I changed the PCM relay out and replaced it, put brand new bulbs in, and also had a mechanic do a reset on the computer but still have no signal lights and no brake lights. I am completely stumped now as I have changed everything possible that could go to brake lights and signals lights and s… Read complete

Tail/brake lights work.no cargo/3brake/interior lights. Dashpanel lights works.no lights on air conditions controls

I replace the bulbs I have checked all the fuses I replaced the flashers and I still don't have turn signals brake lights or hazards

I had some wire short underneath the dash that led into a light blue box probably a relay and I have no brake lights or turn signals I've replaced the main switch the brakes brake switch I've replaced the cruise control switch I've replaced multiple fuses and there's a light blue box that came off the main wiring harness look like it was pigtailed into it that cluster of wires dead in into and that art on the metal underneath the dash and basically melted whatever that box was and I don't know what it is to get it replaced please can you help me

I want to check the fuse for my brake and signal lights but I need to find the fuse panel

Replaced the brake booster and now my abs light and brake light on the dash are on. My truck doesn't have abs

I have no turn signals or brake light I checked all the fuses and they look good and all the running lights work like high and low beams and I have tail lights
Just no turn signals or brake lights

My left light isn’t working. Right side does

No power or the parking brake and turn light on 4 way tow plug

Lose of Pawer and abs and brake light are on and loss of power

Right side brake and signal lights quit working

Brake light comes on when using brakes while in reverse. No light when braking in drive.

I have a 2012 fx2 the driver side brake light and
Blinker quit working. I’ve changed bulbs,checked fuses/relays still can’t find the problem.

I have put a brake Module on it front hubs new and the light still want go off I have clear the code but still comes back.

I have no brake lights or turn lights outside or inside on the dash

Turn signals and brake lights work but running lightts do not...
Can I find a blown fuse for the problem nor a proper wiring diagram and map of the fuse box

I have brake lights reverse lights and turn signals but when I turn on my lights nothing out back. I know it's a fuse interior panel but nobody seems to know which one. Please help.

Check engine light was on so had auto zone run a scan on it. And at that time my truck would barley creep down the road. Well holy crap a ton of codes parked it till was able to slowly work on it. First changed all spark plugs helped a little then all 8 coil packs. New throttle body new EGR valve. Got a little better new fuel filter. Still ruff idle and cutting out on exceleration. Used smoke machine to check vacuum leaks didn't see any smoke. Checked vacuum line from brake booster that hooks to back of intake seems intact. Brake light stays on mostly sometimes flashes on and off. I'm at a loss help me figure this out. Plz

My hazard, turn signal, and brake lights aren't working

When I have the cruise control set and turn on my right turn signal, the cruise control goes off. Also, when I turn on the left turn signal, it blinks rapidly and stop light not working on left side.

The headlights and the rear lights don't work, only the brake light works.

My dashboard lights switching from brake lights to tire pressure to road lanes icons keep coming up I disconnect the battery but it's still doing the same

I have high and low beam head lights and all the running lights but no turn signals are rear brake lights

I have power going to my trailer for the trailer brakes and getting ground to the trailer but brake lights tail lights or turn signals not working fuses are all good?

First started would crank but not start. Check and replaced fuel mump fuse that was melted on one side. Started without any issues, however, the engine began to run rough and have power surges. I disconnected the battery for 5 minutes thinking it would reset the computer.
No change in the system. Runs rough, slow acceleration and sometimes will die at a stop light. Should i replace the fuel pump driver or the fuel pump first?

Can't find the fuse box brake lights gone